Who’s afraid of Old Man Winter? Not riders wearing Arctiva snowmobile apparel, that’s for sure.

            Arctiva apparel is specifically engineered to keep your snow stormers warm, dry, and comfortable throughout the sub-freezin’ season. Thoughtfully crafted from carefully selected materials for temperature regulation and maximum articulation, Arctiva suits effectively seal out the wind and the wet while also including useful storage spaces plus handy little extras like a key clip and an attached goggle and shield wiper.

LAT48, The Crossover Suits

            A combination of trail, mountain, and race-inspired features, the new Arctiva LAT48 collection is the solution for riders who want a go-anywhere, do-anything snowmobile suit without breaking the bank. Fully waterproof, breathable, and insulated, LAT48 garments are constructed on a durable polyester chassis with relaxed fit and exciting features including removable hood and bib tops, full length leg zippers, and adjustable bib length that allow tailoring the suit to the rider’s immediate needs while insuring maximum flexibility to handle any conditions.

            Attractively styled LAT48 garments are available for men in black/green and black/burgundy colors with sizes from small to 3X large, and for women in black/mint and black/white choices with sizes from small to 2X large.

Give Cold Feet The Boot

            There’s no need for cold or wet feet while snowmobiling. New Arctiva Advance boots move the state of the art ahead with a fully waterproof liner, high-loft fleece inner surface, and a proprietary removable insulated insole that adds extra insulation to the toe box and bottom of the foot. Developed to insure excellent mobility, good support, and walkability, these 12-inch tall lace-up boots are rated to minus 40 degrees F (-40C). They are available in men’s sizes 8 to 14, with replacement insoles also available.

Better Vision With New Vibe Goggles

            Good vision is a must in the wide range of conditions experienced during winter riding, and fogging is the constant arch-enemy of all winter eye protection. New Vibe goggles do not fog. This sleek, clean, and aggressively styled new eye wear is engineered specifically for winter riding with dual-pane anti-fog lenses, tri-density foam for an effective peripheral seal, adjustable straps featuring silicone grip, and removable nose guards on all versions. Five frame/strap color choices with six different replacement lenses insure that riders can get the combinations that suit them best.

Even More Pivot

            Now in its third year, Arctiva’s extraordinarily popular Pivot series now is available in even more color combinations. The new Pivot 3 collection adds new graphics schemes in five more color combinations for men and three new combinations for women while retaining all the great Pivot features. And note that men’s bibs are now available in short lengths for sizes 3XL to 5XL.

            New Pivot gloves and mittens are fully insulated, waterproof, windproof, and breathable with long gauntlets to seal out cold and snow at the jacket interface. All have adjustable wrists and cuffs, and gloves feature an eye wear wiper on the first finger of the left hand. Men’s gloves are available in six color schemes, with women’

            And existing Pivot and Pivot 2 garments return again again this year, too. All Pivot series garments are available in a wide range of men’s and women’s sizes with prices that will please your most budget-conscious customers.

            All your other Arctiva favorites are back, too, including the Summit, Vibe, and Mech suits, and layering garments. Accessory lines including balaclavas, helmets, casuals, and tote bags also include some new items for 2020.

            To learn more about helping your snow stormers conquer the common cold this winter, contact your Parts representative about the full line-up of Arctiva Performance Powersports apparel, or visit www.Arctiva.com.

The riding season maybe winding down but we have been busy launching new gear for next season. Whether you are a trail rider or killing it in the mountain powder, we have exactly what you are looking for from head to toe.

Pivot 2 Insulated Jacket

The fully insulated waterproof 300D polyester chassis of the Pivot 2 Insulated Jacket is designed for maximum warmth and performance. The Microporous coated waterproof fabric, seam sealing, and durable waterproof repellant coating on outer shell provides ultimate barrier against water, snow, and wind. The Pivot 2 Jacket comes in five colorways and includes two fleece lined hand warmer pockets and two interior pockets. The fleece lined collar adds to the comfort and warmth of the jacket. The adjustable cuff, collar and bottom hem designed to keep warmth in and cold and snow out. The inclusion of YKK® Zippers makes the Pivot 2 Insulated Jacket a great option.

Click Here for more information on the Pivot 2 Insulated Jacket.

 

Summit Shell 

The new Summit Shell Jacket features a durable waterproof nylon shell chassis with 750D nylon in critical wear areas and comes in two colorways. The Summit includes multiple YKK® zippered vents for maximum temperature regulation, two in the front, two on the side and one on the back. Along with the zippered vents there are 5 YKK® zippered pockets, two hand warmer, one chest pocket, one back pocket and two interior pockets. The adjustable cuff, collar and bottom hem is designed to keep warmth in and cold and snow out. Including strategically placed retro-reflective graphics increase the riders visibility.

Like the Summit Jacket, the Summit Shell Pant is made of the same durable waterproof nylon shell chassis with 750D nylon in critical wear areas. Waterproof fabrics, seam sealing, and durable waterproof repellant coating on outer shell provides ultimate barrier against water, snow, and wind. The pant also include YKK® Zippered vents for maximum temperature regulation, two in the front, 2 in the side and one in the back. The Summit Shell Pant includes five YKK® zippered pockets, two hand-warmers, one chest.

Click here for more information on the Summit Shell.

 

SC1 Glove

These snowbike and snowcross race inspired, water resistant, performance fit short cuff length gloves are built on a MX style chassis. The Thin fleece lining at the inside top of the hand increases warmth without adding bulk. The single layer, water resistant leather palm maximizes feel and grip. The SC1 Glove is great for snowcross racing, spring backcountry riding or riding with grip gauntlets.

Click here for more information on the SC1 Glove

 

 

Available in 4 colorways. The Summit Helmet is an open face, injection molded polycarbonate shell. The dual forehead, chin and rear exhaust vents increases airflow.  The fully removable polyester moisture wicking liner and cheek pads add to the comfort level of the Summit. This helmet is also DOT and ECE Approved and includes a breathbox, chin curtain and vent plug kit but the greatest feature of the Summit Helmet is the built in MIPS Brain Protection System.

 

 

MIPS

The MIPS technology was developed in Sweden in 1996 and is scientifically proven to reducerotational motion by absorbing and redirecting rotational energies and forces transferred to the brain from angled impacts to the head.

 

This is How It Works

In a helmet with MIPS Brain Protection System (BPS) the shell and the liner are separated by a Low Friction Layer. When a helmet with MIPS Brain Protection System is subjected to an angled impact, the low friction layer allows the helmet to slide relative to the head. The MIPS BPS is designed to add protection in helmets against the rotational motion. The rotational motion is a combination of rotational energy (angular velocity) and rotational forces (from angular acceleration) that both affects the brain and increases the risk for minor and severe brain injuries. MIPS BPS has been scientifically proven to reduce rotational motion when implemented in a helmet by absorbing and redirecting rotational energies and forces transferred to the brain.

The Great Misconception

Accident statistics show that many injuries occur due to angled impact to the head. However, in standard helmet tests the helmet is dropped vertically onto a flat surface. The results are helpful for measuring precise vertical impacts, but far inferior for measuring the more realistic scenario of an angled impact. MIPS has been developed for reality and increases protection against angled impacts.

The Arctiva Summit Helmet is loaded with features and safety precautions all for under $150, visit your local Parts Unlimited dealer for more information.

 

When Harris Huizenga, the high school junior from Bismarck, North Dakota first jumped on a snowbike from his dad’s shop, Full Throttle Motorsports, little did he know it would open up a whole new world. Harris took to the relatively new machine so well he wanted to race them competitively.

2017 became a break out year for Harris, he qualified for the Winter X Games in Aspen where he competed as the youngest competitor but that didn’t keep Harris from having a strong showing with a top 10 finish.

Over on the inaugural AMA Snowbike Championship Series season, Harris showed he can compete with the best the sport has to offer by scoring a 1^st place victory in Round 4 at Detroit Lakes, Minnesota. How did Harris follow that performance up? With another first place victory the following week in Hill City, Minnesota. Adding some top ten finishes and Harris was in the hunt for the 2017 Championship for the final two rounds. Despite riding hard and being competitive Harris didn’t grab the championship, however that has made him only more hungry for the next season and to continue building on what he learned in 2017.

An often overlooked piece of gear when it comes to snow season is one of the most important, the helmet, unless of course you don’t care to protect your head. Arctiva and our sister company, Z1R offer a variety of options for you to cover your melon.

First up is Arctiva’s first ever helmet, the open face Rise helmet. Immediately you notice the color and the striking graphics that will not only make sure you are seen on the trail for safety purposes but also making fellow riders envious. The Arctiva Rise helmet is constructed of a ABS/Polycarbonate shell that meets DOT standards and is ECE 22.05 approved. The removable vent plugs allow for optimal venting with intake/exhaust ports so you can adjust adjust to conditions as does the removable breath box. The Arctiva Rise is designed for comfort with the inclusion of multi-density padding and nylex comfort liner as well as removable and washable cheek pads that give you a custom fit. The Arctiva Rise doesn’t just look and feel great it includes Dual-density EPS removable liner provides a more progressive impact absorption to add to the safety of the helmet. Couple the Arctiva Rise helmet with the Arctiva Comp 2 Vert or Comp 2 Rev Goggles to get everything you need above the neck. The Arctiva Rise Helmet is available at your local Parts Unlimited dealer for $99.95, yes that is the correct price.

 

If a full faced helmet is more your style Z1R has a helmet for you, the Strike Ops Snow. This helmet is constructed of an injection molded polycarbonate shell in gloss and flat black and includes high volume intake and exhaust vents. The full removable, polyester moisture wicking cheekpads add to the comfort of the Z1R Strike Ops Snow helmet. The included chin vent improves interior airflow and helps reduce shield fogging. If that isn’t enough anti-fogging for your taste, there is a version of the helmet that includes a double lens, anti-fog electric shield. As with the Arctiva Rise helmet, the Strike Ops Snow helmet is DOT and ECE 22.05 approved. The Z1R Strike Ops Snow helmet is available from your local Parts Unlimited dealer for $129.95 and only $169.95 for the version with the electric shield.

 

Our last helmet that we are showing today is the Z1R Solaris Modular that comes in flat black and gloss black and is constructed of an advanced ABS/Polycarbonate shell that meets DOT standards. The double-lens, anti-fog shield features a no-tool quick release mechanism. Removable and washable cheekpads, multi-density padding and nylex liner all add to the comfort of this helmet. Like the Strike Ops Snow helmet, the Solaris Modular has a version that includes an electric shield. Can you believe you can find the Z1R Solaris Modular Snow helmet at your local Parts Unlimited Dealer for only $179.95, $20 more for the electric shield version.

 

After seeing these helmets you are ready to replace the old ones in your garage or closet, right? Head over to our dealer locator and find your closest Parts Unlimited dealer.

A great way to ensure not only a comfortable ride but a safe one is to incorporate a layering system into your riding gear. Fortunately for you Arctiva has an entire line for you to accomplish this the next time you hit the trails.

 

An effective layering system starts with a base layer which wicks moisture (sweat) away from your body. This base layer must be worn directly against the skin. Our Evaporator gear, made from a wicking quick-dry material, is the recommended base layer for the Arctiva layering system. The Arctiva Evaporator Wicking Base Layer provides the breathability you are looking for in this case. Arctiva offers a shirt and a pant in this line.

 

 

 

The second layer in the Arctiva system is the Regulator. Made from a unique blend of polyester/Spandex yarns resulting in an incredibly soft hand. When paired with the Evaporator base layer the combination is ideal for riding in moderate to cold temperatures. The Mid-weight jersey and pant in this line features 4-way stretch fabric for ultimate comfort and a range of movement.

 

 

 

For more extreme temperatures, the Arctiva Insulator series provides the additional warmth required. The Insulator gear is made of a blend of micro polyester fleece/Spandex and combined with Evaporator or Regulator layers, provides extra warmth in extremely cold environments. The mid-weight fleece and pant also provide quick drying and moisture wicking.

 

 

 

We haven’t left out you female riders, we offer a line specifically designed for you as well. Women’s Regulator is the primary base layer for next to skin comfort, warmth, and moisture management. When temps are really low, combine with the mid-weight fleece women’s Insulator jacket and pant for extra warmth and all day comfort.

 

 

 

For more extreme temperatures, the Arctiva Insulator series provides the additional warmth required. The Insulator gear is made of a blend of micro polyester fleece/Spandex and combined with the Regulator layer, provides extra warmth in extremely cold environments. The jacket includes to hand pockets and the pant includes a soft elastic waistband and simple slim bottom hem for comfort.

To add any of the pieces from our Arctiva Layering line please visit your local Parts Unlimited dealer.

If you have seen the movie Forrest Gump, you are aware that the number one rule in Lieutenant Dan’s platoon is to protect your feet, we believe in that rule as well when you are out on the trail. For that reason we present our line of Arctiva boots.

Mechanized Arctiva boots are designed to keep feet toasty warm. This boot has a removable liner with 3M™ Thinsulate™ Insulation and moisture wicking lining to keep feet warm and dry. The new ratcheting buckle and straps combined with Speed Lacing, makes boot entry and removal a cinch and the 12 inch height easily accommodates deep snow. A waterproof lower blocks the entry of snow and ice while the highly water repellent nylon upper helps keep water at bay. The grip tread sole provides unsurpassed traction on snowy surfaces and a full length internal EVA midsole provides extra support for all day comfort. The Mechanized Boot is rated to -40° F and are available in Black and Black/Gray.

 

 

 

 

Comp Arctiva boots feature a removable insulated liner that has a high wicking fleece interior to keep feet warm and dry. At 10 inches tall, they are high enough to keep out snow, yet low enough for aggressive snowmobile riding. Its new micro-adjustable,ratcheting forefoot power strap & fast lacing system holds the heel securely in place while keeping the foot from shifting inside the boot. The grip tread sole provides excellent traction on slippery surfaces. With an EVA mid-sole that provides a secure platform for the foot, the Comp is great for all types of outdoor winter activities. The Comp Boot is rated to -40° F and are available in Black and Black/Orange.

 

 

 

To go inside your Mechanized or Comp boots, Arctiva has two types of socks. The Evaporator Wicking Sock pulls moisture away from the skin to hold in warmth and the Insulator Heavy-Weight Sock includes padded shin inserts for added protection. Both of these are available in youth sizes.